SEPLITA ®MA943 resina aniónica de base débil

PRODUCT INFORMATION

SEPLITE ® MA943

SEPLITE ® Weak base anionic resin

SEPLITE ® MA943 is a weak basic macroporous anion resin with exclusively tertiary amino groups.

The proprietary functionalization method based on Aminomehtylation allows Seplite ® MA943 to provide a comparatively low basicity and an exceptionally high total capacity.

Its macroporous structure has been specially optimized to provide a high resistance to osmotic chocs and a good regenerability in presence of large organic molecules.

This macroporous structured paired with its unique functionalization make Seplite ® MA943 especially well suited for the following application:

Removal of anionic component of acids from process solutions

Abatement of Natural Organic Matter from surface water

Removal of anionic complexes of metals especially noble metals

SEPLITE ® MA943 weak base anionic resin Precautions:

Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight. Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.

In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist. Material and samples must be disposed according to local regulations.

Dry polymers will expand when become wetted and may cause an exothermic reaction. Spilled materials may be slippery.

SEPLITE ® and Monojet℃ are registered trademarks of Sunresin New Materials Co. Ltd.

This information is general information and may differ from that based on actual conditions. For more information about SEPLITE ® resins, please contact SUNRESIN ® directly.

All information set forth herein is for informational purposes only. This information is general descriptive(introductory) information of SUNRESIN and its related products, technologies and services. Neither shall constitute the guarantee of SUNRESIN and its affiliates to products, technologies and services in specific fields and specific application conditions results, unless otherwise expressly noted. SUNRESIN and its affiliates assumes no obligation or liability for the information in this document. Customer is responsible for judging whether the information is appropriate for Customer's concrete demand and are obliged to understand whether the use of these products, technologies and services is permitted by the laws and regulations of their countries and relevant regions. Unless expressly stated, no freedom from infringement of use any patent or trademark or intellectual property rights owned by SUNRESIN or its affiliated companies under this document is to be inferred.